Texas Instruments TI InterActive! Getting Started Manual page 34

Entering the data
TIP: The tabs at the
bottom of the editor let
you switch quickly
among list editing,
matrix editing, and
spreadsheet operations.
34 Getting Started with TI InterActive!
You have recorded the following rates of sink after making
several timed descents at different gliding speeds. You decide to
enter the airspeeds into list L1 and the sink rates into L2.
Airspeeds (L1)
30 mph
40 mph
50 mph
60 mph
70 mph
1. On the TI InterActive! toolbar, click the List button
List Editor is displayed, with the empty cell at the top of list L1
selected and ready for an entry.
2. Type the first airspeed, 30 , and then press the down arrow key
on the computer keyboard to move to the next cell.
3. Type the next airspeed, press the down arrow key, and
continue until you have entered all the airspeeds into L1.
4. Click the empty cell at the top of list L2.
5. Type the sink rates in the second column in a similar manner,
with the number in each cell corresponding to the number in
the first column as shown in the table above.
Sink Rates (L2)
600 ft./min.
550 ft./min.
700 ft./min.
875 ft./min.
1050 ft./min.
. The