Philips DVDR3600 User Manual page 15

Option 3: Connect to composite
video sockets
OUTPUT
VIDEO AUDIO VIDEO IN
ANTENNA-IN
CVBS L
EXT 2
AUX - I/O
HDMI OUT HDMI OUT
R
COAXIAL
TV-OUT S-VIDEO
EXT 1 TO TV - I/O (DIGITAL AUDIO)
1
Connect a composite video cable (yellow
end - not supplied) from the CVBS
OUTPUT socket to the video input socket
on the TV.
2
Connect an audio cable (red/white ends -
not supplied) from the AUDIO-L/R
sockets to the matching audio input
sockets on the TV.
Tips
•
The video input socket on your TV may be labelled
as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
•
If your TV has a digital audio input socket, you can
enjoy multi-channel surround sound output. See
chapter 'Connect other devices - Connect to AV
amplifi er/ receiver'.
DVDR3600EU_UM_EN_28791.indd 15 DVDR3600EU_UM_EN_28791.indd 15
EXT 3
AUDIO IN
CVBS L
R
OUTPUT
VIDEO AUDIO
CVBS
L
R
Option 4: Connect to HDMI socket
HDMI (High Defi nition Multimedia Interface) is
a digital interface that supports both audio and
video transmission through a single cable.
OUTPUT EXT 3
VIDEO AUDIO VIDEO IN AUDIO IN
ANTENNA-IN CVBS L CVBS L
EXT 2
AUX - I/O
HDMI OUT HDMI OUT
R COAXIAL R
TV-OUT S-VIDEO
EXT 1 TO TV - I/O (DIGITAL AUDIO)
HDMI OUT
HDMI IN
1
Connect a cable (not supplied) from
HDMI
the HDMI OUT to the HDMI IN socket
on your TV.
• To adjust HDMI settings, see chapter
'Adjust settings - Adjust HDMI video
and audio.'
Notes
•
Audio may not be supported through the HDMI
connection, it depends on your TV capabilities. In
this case, make an audio connection to your TV and
turn off the HDMI audio output (See chapter 'Adjust
Settings - Adjust HDMI video and audio setup').
•
HDMI supports HDCP (High-bandwidth Digital
Contents Protection). HDCP is a copy protection
signal that comes with the HD content (DVD disc or
Blu-ray disc).
Tips
•
Use a HDMI/DVI adaptor if your TV has only a DVI
connection. An extra audio connection is needed to
complete this connection.
•
This connection provides the best picture quality.
EN 15
2008-04-21 11:59:33 AM 2008-04-21 11:59:33 AM