Philips HDR3800 User Manual page 87

Picture
No picture
The picture is distorted or
black and white during
playback.
There is picture or sound
interference with the TV
reception.
Unable to display JPEG
pictures.
Sound
No sound.
The connected amplifi er
produces distorted sound
• Check the video connections. See chapter "Connect".
• Turn on the TV to the Video In channel.
• Use the TV remote control to select the channel until you see
the DVD screen. See chapter "Get Started".
• Check that the video cable (HDMI, CVBS or SCART)
connecting the recorder to the TV is not damaged.
• The disc does not match with the TV colour system standard
(PAL/NTSC).
• The disc is dirty, clean the disc.
• At times, some picture distortion may occur. This is not a
malfunction.
• If you have connected the recorder to a HDMI TV:
- Check if your TV supports the selected HDMI video
resolution. Select a lower HDMI video resolution. (See chapter
"Adjust settings - Setup HDMI video and audio").
- Change to a better quality HDMI cable (e.g. Category 2 cable).
• Check the connection to the antenna or cable TV signal.
• Fine-tune your TV channel. Read chapter "Adjust Settings".
• This unit only supports pictures in JPEG-Exif fi le format with a
resolution not exceeding 4096 x 4096 (horizontal/vertical).
JPEG pictures that are downloaded from the internet or have
been modifi ed using the computer may not be displayed
properly.
• Check the audio connections. See chapter "Connect".
• Depending on the audio device you have connected to the
recorder, set the digital output accordingly. See chapter "Adjust
Settings - Audio settings".
• Do not connect any cables from the recorder to the 'Phono'
input of your amplifi er.
• If you are playing a DTS CD, connect the Hi-Fi system or
amplifi er to the COAXIAL socket of this recorder.
EN 87