Philips HDR3800 User Manual page 74

Set digital output
Select a suitable setting if you have connected
an audio/video device to the COAXIAL socket
on the recorder.
1
Press HOME.
2
Select [ Settings ], then press OK.
3
Select [ Audio ] > [ Digital Output ], then
press .
4
Select an option and press OK.
[ PCM ]
Select this if the connected device cannot
decode multi-channel audio. The recorder
converts Dolby Digital and MPEG-2 multi-
channel signals to PCM (Pulse Code
Modulation).
[ All ]
Select this if the connected device
supports multi-channel audio format. The
audio output is played according to the
audio stream on the disc.
5
To exit the setup menu, press the Blue
button [ Exit ].
Set HDMI audio
See the chapter 'Adjust Settings – Adjust HDMI
video and audio'.
74 EN
Enable night mode
Night mode optimises playback of sound at low
volumes
1
Press HOME.
2
Select [ Settings ], then press OK.
3
Select [ Audio ] > [ Night Mode ], then
press .
4
Select an option and press OK.
[ On ]
Enable night mode. High volume outputs
are softened and low volume outputs are
increased to an audible level.
[ Off ]
Disable night mode. Enjoy surround sound
with its full dynamic range.
5
To exit the setup menu, press the Blue
button [ Exit ].