6
Press
(or the numeric buttons) to
enter the correct time, then press the
Green button [ Next ].
The eco mode selection page is
displayed.
To view the external
source during standby,
select Eco mode off.
Previous
Next
7
Select the eco mode setting, then press
the Green button [ Next ].
•
[ On ] : Energy saving mode is enabled.
In standby mode, the external device/
source cannot be viewed.
•
[ Off ] : Energy saving mode is disabled.
In standby mode, the external device/
source can be viewed.
The channel search screen is displayed.
Searching channels.
Please wait.
38%
Channels found
5
Previous
Next
8
Store the preset channels:
•
If a cable box or satellite receiver is
connected:
Select [ Stop Search ], then press the
Green button [ Next ] to skip the
channel search.
•
If an off-air antenna is connected:
Wait for the channel search to
complete. This process takes a few
minutes.
ECO Mode
On
Off
Auto Search
Stop Search
9
Press the Green button [ Next ].
To install interactive TV
program guide, it is
recommended to continue
with the GUIDE Plus+ setup.
Previous
Next
•
To continue with GUIDE Plus setup:
Select [ Start setup ], then press the
Green button [ Next ]. (See chapter
'Get started - GUIDE Plus+ Setup')
•
To skip GUIDE Plus setup:
Select [ Skip setup ], then press OK.
The recorder is now ready for use.
Tips
•
To re-install or modify the TV channels, see chapter
"Adjust Settings - Tuner settings".
•
To record from a cable box or satellite receiver, see
chapter "Record from other devices".
GUIDE Plus+ setup
Start setup
Skip setup
EN
23