Connect to an analogue camcorder
1
Connect a video cable (yellow - not
supplied) from the CVBS IN socket and to
the S-VHS or video output socket on the
camcorder.
2
Connect the audio cable (not supplied)
from the AUDIO IN sockets and to the
audio output sockets on the camcorder.
•
To view the video input, press HOME
and select [ EXT3 ], then press OK.
Tip
•
To record from this device, see chapter "Record
from other devices".
20
EN
VIDEO OUT
AUDIO OUT
Connect to a USB device or digital
camera
1
Flip down the cover on the right hand
corner of this recorder.
2
Connect a USB device or digital camera to
the
USB socket.
To view the content, press USB.
•
Note
•
The USB socket does not support a USB hub device.
Only digital cameras which support USB Mass
Storage Device class standard are supported.
Tips
•
You can copy media fi les (e.g. jpeg fi les) from the
recorder to your USB device.
•
To view the contents of the connected USB device,
see chapter "Play – Play from USB".