Clear Code - Russound A-C68 Installation Manual

CLEAR CODE PROCEDURE
The Clear Code Command Type procedure allows you to clear the
current command type of a selected source.
Complete primary source setup on page 27
Cmd/Type (yellow) blinks SLOWLY
Aim A-SRC1 remote control at IR In
ON OFF ALL OFF SLEEP
ZONE
DISC
Enter command type 00
Cmd/Type (yellow) turns OFF
5.
6. Source/Test (green) blinks SLOWLY
7. Returns to source selection
8. Repeat primary source setup on page 27
To EXIT, press and RELEASE Setup button
9.
32
Source Setup - Clear Code Command Type Procedure
OR
Russound A-C68 Installation Manual
A-SRC1 Remote
Control buttons
ON OFF ALL SLEEP
OFF
ZONE
DISC