Advertisement
Quick Links
Advertisement
Related Manuals for Russound ALTX SC
Summary of Contents for Russound ALTX SC
- Page 1 ALTx sc Volume Control Instruction Manual...
-
Page 2: Installation Considerations
From the wallplate/faceplate to the back of the ALTx sc control, the mounting depth of the ALTx sc is 2 7/8”. You must use a minimum of a standard light switch plaster ring (p-ring) or a standard 20 cu. in. (or larg-... -
Page 3: Operation
5. Adjust the volume of the speakers to the desired listening level using the ALTx sc. 6. You can turn off the speakers in each room by turning the knob on the ALTx sc com- pletely counter-clockwise. - Page 4 ULTRAMATCH™ VOLUME CONTROLS Russound UltraMatch™ volume controls eliminate the need for a speaker selector. By determining the drive capa- bility of the amplifier with a few simple calculations, we Fig 1 1 X - 2...
- Page 5 4. A minimum speaker load of 4 ohms can be connected to the output of each UltraMatch™ volume control. EZB CONNECTING BLOCKS The EZB-1 and EZB-2 connecting blocks are Russound accessories that simplify connections of multiple volume controls and speaker pairs. The EZB-1 is a neat, compact wiring device...
-
Page 6: Wiring Instructions
INPUT volume controls, it is recommended to wire all speak- ers to the A output. If you have any questions contact Russound directly. 2. As outlined in step #1, connect the speaker wires to the connector labeled output. 3. Install the completed assembly in the junction box. -
Page 7: Warranty
During the warranty period, Russound, at its option, will replace or repair any defec- tive part and correct any defect in workmanship without charge for parts or labor. For this warranty to apply, the unit must be installed and used in accordance to its written instruc- tions. - Page 8 5 Forbes Rd. Newmarket, NH 03857 603.659.5170 • Fax 603.659.5388 e-mail: tech@russound.com Come visit us at:...