Device Type Assignment; Device Ir Code Assignment - Russound A-C68 Installation Manual

IR DEVICE CODE PROCEDURE
The Device Type and Code procedure assigns a command type and IR
device code for each source. IR device codes are listed on pages 35-37.
Complete primary source setup on page 27
Cmd/Type (yellow) blinks SLOWLY
Aim A-SRC1 remote control at IR In
ON OFF OFF ALL SLEEP
ZONE
DISC
Enter command type number (see chart at right)
# #
Cmd/Type (yellow) turns OFF
5.
Code/Key (orange) blinks SLOWLY
6.
Enter four-digit device code from
# # # #
7.
list on pages 35 - 37
8.
Code/Key (orange) turns OFF
9.
Source/Test (green) blinks FAST
10.
Test code - press a command button
11.
IR Learn (red) blinks to confirm IR code sent
If IR Learn doesn't blink, code is invalid, go to step 12.
Press and RELEASE Setup button TWICE.
12.
For next source, complete primary source setup on page 27
13.
28
Source Setup - Device Type and Code Procedure
Russound A-C68 Installation Manual
A-SRC1 Remote
Control buttons
ON OFF OFF ALL SLEEP
ZONE
DISC