Operating Your Water Dispenser; Cold/Hot Water Faucets; Cold/Hot Water Switches; Cold/Hot Water Indicator Lights - Haier WDQS055 Installation Instructions Manual

Operating Your Water Dispenser

This water dispenser maintains instant hot and cold water for your cooking and
drinking needs. It accepts 2, 3 or 5-gallon water bottles.
Cold (blue) / Hot (red) Water Faucets
• Press the tap lever down to release the water flow.
• Pull the tap lever up to stop the water flow.
Note: The hot (red) water faucet is equipped with a child
safety lock to prevent accidental spilling of hot water. To
release the hot water flow, the tap lever must be
squeezed and then pushed down.
• In the case of WDQT165W press in the hot water safety child
lock and then push down. Release the lever to stop the water
flow.
• In case of the WDQSC245 for hot water press the child safety
latch down and press in the hot water lever.
Cold (green) / Hot (red) Water Switches
Cold Water Switch (green):
The cold water switch activates the cooling process when turned ON.
• Press the switch to the ON position. The switch should become lit.
Note: When turning on the unit for the first time, it will take
some time to chill the water.
Hot Water Switch (red):
The hot water switch activates the heating process when turned ON.
• Press the switch to the ON position. The switch should become lit.
Caution! Be careful when carrying hot water in your cup or
container to avoid any injury or harm from spills.
Cold (green) / Hot (red) Water Indicator Lights
When the green and red lights are illuminated on the front of the
unit, the heating and cooling process is in progress. When the cold
and hot water has reached their proper temperatures, both lights
will turn off automatically. Normally, hot water reaches proper
temperature first.
Hot water lever (red)
English
Child safety latch
16