Table of Contents
Advertisement
Basic 6 Channel Analog Audio Output Mode
Use the back audio panel to connect the audio
output without any additional module.
STEP 1 :
Connect the front channels to "Line Out",the rear
channels to "Line In", and the Center/Subwoofer
channels to "MIC In".
STEP 2 :
Following installation of the audio driver, you find a
Sound Effect icon
on the lower right hand
taskbar. Click the icon to select the function.
STEP 3 :
Select "Speaker Configuration", and choose the
"6-channel mode for 5.1 speaker output".
Disable "Only SURROUND-KIT" and press "OK".
- 67 -
Line Out
Line In
MIC In
Appendix
Advertisement
Table of Contents
