Standard Cmos Features - Gigabyte GA-8GEM800 User Manual

Intel pentium 4 socket 478 processor motherboard
Hide thumbs Also See for GA-8GEM800:
Table of Contents

Advertisement

2-1

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Date (mm :dd:yy)
Time (hh:mm :ss)
} IDE Primary Master
} IDE Primary Slave
} IDE Secondary Master
} IDE Secondary Slave
Drive A
Drive B
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
Total Memory
higf: Move
Enter: Select
F5: Previous Values
Date
The date format is <week>, <month>, <day>, <year>.
Week
The week, from Sun to Sat, determined by the BIOS and is displayed only.
Month
The month, Jan. through Dec.
Day
The day, from 1 to 31 (or the maximum allowed in the month).
Year
The year, from 1999 through 2098.
Time
The times format in <hour> <minute> <second>. The time is calculated based on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Primary Master, Slave /IDE Secondary Master, Slave
IDE HDD Auto-Detection
IDE Primary/Secondary Master(Slave) setup
Auto
Allows BIOS to automatically detect IDE devices during POST(default)
None
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
Manual
User can manually input the correct settings
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto (Default:Auto)
Capacity
Capacity of currently installed hard disk.
Hard drive information should be labeled on the outside drive casing.
Enter the appropriate option based on this information.
Cylinder
Number of cylinders
Head
Number of heads
Precomp
Write precomp
Landing Zone Landing zone
Sector
Number of sectors
GA-8GEM800 Motherboard
Standard CMOS Features
Thu, July 29 2004
22:31:24
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[None]
[Disabled]
[All, But Keyboard]
640K
127M
128M
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Press "Enter" to select this option for automatic device detection.
You can use one of the three methods below:
- 32 -
Item Help
Menu Level }
Change the day, month,
y e ar
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
<Day >
1 to 31 (or maximum
allowed in the month)
<Yea r>
1999 to 2098
ESC: Exit
F1: General Help
F7: Optimized Defaults

Advertisement

Table of Contents
loading

Table of Contents