Table of Contents
Advertisement
Using the Q-Flash
utility:
TM
This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you
begin" section above, you must prepare a floppy disk having the BIOS file for your motherboard and
insert it to your computer. If you have already put the floppy disk into your system and have entered
the Q-Flash utility, please follow the steps below to flash BIOS.
Steps:
1. Press arrow buttons on your keyboard to move the light bar to "Load Main BIOS from Floppy" item
in the Q-Flash menu and press Enter button.
Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy
disk.
If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save
Main BIOS to Floppy" item.
2. Move to the BIOS file you want to flash and press Enter.
In this example, we only download one BIOS file to the floppy disk so only one BIOS file,
8KNXPU.Fba, is listed.
Please confirm again you have the correct BIOS file for your motherboard.
Boot From.........................................
Main ROM Type/Size.............................SST 49LF004A
Backup ROM Type/Size.........................SST 49LF004A
Enter : Run
After pressing Enter, you'll then see the progress of reading the BIOS file from the floppy disk.
Boot From.........................................
Main ROM Type/Size.............................SST 49LF004A
Backup ROM Type/Size.........................SST 49LF004A
Enter : Run
After BIOS file is read, you'll see a dialog box asking you "Are you sure to update BIOS?"
GA-8GEM800 Motherboard
Dual BIOS Utility
Wide Range Protection
Disable
1 file(s) found
Boot From
Main Bios
8KNXPU.Fba
Auto Recovery
Enable
Halt On Error
Disable
Total size : 1.39M
Copy Main ROM Data to Backup
F5 : Refresh
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Load Main BIOS from Floppy
Load Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
hi:Move
ESC:Reset
Dual BIOS Utility
Wide Range Protection
Disable
Boot From
Main Bios
Reading BIOS file from floppy ...
Auto Recovery
Enable
>>>>>>>>>>>>>>.....................
Halt On Error
Disable
Copy Main ROM Data to Backup
Don't Turn Off Power or Reset System
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Load Main BIOS from Floppy
Load Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
hi:Move
ESC:Reset
- 58 -
Main Bios
512K
512K
512K
Free size : 911.50K
DEL : Delete
F10:Power Off
Main Bios
512K
512K
F10:Power Off
BIOS file in the floppy
disk.
Do not trun off power or
reset your system at this
stage!!
Advertisement
Table of Contents
