Gigabyte GA-7IX User Manual page 47

7IX Motherboard
AGP Aperture Size (MB)
32
64
128
256
K7 CLK_CTL Select
Optimal
Default
SDRAM ECC Setting
Enabled
Disabled
SDRAM PH Limit
This function specify the number of consecutive Page-Hit requests to allow before
choosing a non-Page-Hit request.
1 Cycle
4 Cycle
32 Cycle
64 Cycle
SDRAM Idle Limit
This function specify the number of idle cycles to wait before precharging an idle bank.(Idle
cycles are defined as cycles where no valid request is asserted to the MCT.)
1 Cycle
8 Cycle
32 Cycle
64 Cycle
Set AGP Aperture Size to 32.
Set AGP Aperture Size to 64. ( Default value )
Set AGP Aperture Size to 128.
Set AGP Aperture Size to 256.
Set K7 CLK_CTL Select to Optimal. ( Default value )
Set K7 CLK_CTL Select to Default.
Enabled SDRAM ECC Setting function.
Disabled this function. ( Default value )
Set SDRAM PH Limit to 1 Cycle.
Set SDRAM PH Limit to 4 Cycle.
Set SDRAM PH Limit to 32 Cycle. ( Default value )
Set SDRAM PH Limit to 64 Cycle.
Set SDRAM Idle Limit to 1 Cycle.
Set SDRAM Idle Limit to 8 Cycle. ( Default value )
Set SDRAM Idle Limit to 32 Cycle.
Set SDRAM Idle Limit to 64 Cycle.
35