Table of Contents
Advertisement
USB Mouse Support
Enabled
Enable USB Mouse Support.
Disabled
Disable USB Mouse Support. (Default value)
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
OnBoard Parallel port
M This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
378/IRQ7
Enable onboard LPT port and address is 378, Using IRQ7.(Default Value)
278/IRQ5
Enable onboard LPT port and address is 278,Using IRQ5.
3BC/IRQ7
Enable onboard LPT port and address is 3BC,Using IRQ7.
Disabled
Disable onboard parallel port.
Parallel Port Mode
M This feature allows you to connect with an advanced print via the port mode it supports.
SPP
EPP
ECP
ECP+EPP
BIOS will automatically setup the port 1 address.
Enable onboard Serial port 1 and address is 3F8,Using IRQ4. (Default value)
Enable onboard Serial port 1 and address is 2F8,Using IRQ3.
Enable onboard Serial port 1 and address is 3E8,Using IRQ4.
Enable onboard Serial port 1 and address is 2E8,Using IRQ3.
Disable onboard Serial port 1.
Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
Using Parallel port as Enhanced Parallel Port IRQ5.
Using Parallel port as Extended Capabilities Port using IRQ7.
Using Parallel port as ECP & EPP mode.
- 37 -
BIOS Setup
Advertisement
Table of Contents
