Product Specifications - Gigabyte GA-770T-USB3 User Manual

1-2

Product Specifications

CPU
Hyper Transport Bus 
Chipset  North Bridge: AMD 770
 South Bridge: AMD SB710
Memory
Audio  Realtek ALC888/892 codec

LAN
Expansion Slots 
Storage Interface 
USB
Hardware Installation
Support for AM3 processors:

AMD Phenom II processor/ AMD Athlon
™
(Go to GIGABYTE's website for the latest CPU support list.)
5200 MT/s
4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR3 1800 (O.C.)/1666/1333/1066 MHz memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
Support for ECC memory modules

 High Definition Audio
 2/4/5.1/7.1-channel
 Support for S/PDIF In/Out
Support for CD In
1 x Realtek RTL8111D chips (10/100/1000 Mbit)

1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
4 x PCI Express x1 slots

2 x PCI slots

South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,
SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
iTE IT8720 chip:

- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
South Bridge:

- Up to 10 USB 2.0/1.1 ports (6 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
NEC D720200F1 chip:

- Up to 2 USB 3.0/2.0 ports on the back panel
II processor
™
(Note 2)
- 10 -
(Note 1)