Memory Clock; Dram Configuration - Gigabyte GA-770T-USB3 User Manual

Memory Clock

This option is configurable only when Set Memory Clock is set to Manual.
X4.00
X5.33
X6.66
X8.00

DRAM Configuration

DCTs Mode
DDR3 Timing Items
x CAS# latency
x RAS to CAS R/W Delay
x Row Precharge Time
x Minimum RAS Active Time
x 1T/2T Command Timing
x TwTr Command Delay
x Trfc0 for DIMM1
x Trfc2 for DIMM2
x Trfc1 for DIMM3
x Trfc3 for DIMM4
x Write Recovery Time
x Precharge Time
x Row Cycle Time
x RAS to RAS Delay
Bank interleaving
Channel interleave
higf : Move Enter: Select
F5: Previous Values
DCTs Mode
Allows you to set memory control mode.
Ganged
Unganged
DDR3 Timing Items
Manual allows all DDR3 Timing items below to be configurable.
Options are: Auto (default), Manual.
CAS# latency
Options are: Auto (default), 4T~12T.
RAS to CAS R/W Delay
Options are: Auto (default), 5T~12T.
Row Precharge Time
Options are: Auto (default), 5T~12T.
Minimum RAS Active Time
Options are: Auto (default), 15T~30T.
1T/2T Command Timing
Options are: Auto (default), 1T, 2T.
TwTr Command Delay
Options are: Auto (default), 4T~7T.
BIOS Setup
Sets Memory Clock to X4.00.
Sets Memory Clock to X5.33.
Sets Memory Clock to X6.66.
Sets Memory Clock to X8.00.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAM Configuration
[Unganged]
[Auto]
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
[Enabled]
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Sets memory control mode to single dual-channel.
Sets memory control mode to two single-channel. (Default)
SPD Auto
7T 7T
7T 7T
7T 7T
30T 30T
-- --
5T 5T
90ns 90ns
-- --
-- --
-- --
10T 10T
5T 5T
28T 28T
4T 4T
F10: Save
- 38 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults