Last Number Redial; Number Presentation Restriction - Ericsson Dialog 4106 Basic User Manual

Outgoing Calls
u
*42#
u
©
14

Number presentation restriction

If you do not want your name and number to be displayed to the
person you are calling, you can use the following procedure.
Notes:
This function is only available in newer versions of the
exchange, and it might be blocked for use on your
extension (programmed by your system administrator).
The number presentation restriction is only valid for the
ongoing call, i.e. the procedure has to be repeated the next
time you want to use it.
Lift the handset.
Dial and wait for a new dial tone.
z
Dial the number.
Your name and number is not indicated on the called person's
display.

Last Number Redial

When you initiate a call, the phone automatically stores all the dialed
digits, irrespective of whether the call was successful or not. Stored
numbers can consist of maximum 32 digits.
Note: To redial a number that incorporates a wait for a new
dial tone, you must indicate to the telephone where in the
number it must pause and wait for the new dial tone. To do
this, press the Redial/Pause key at the proper place in the
number. See section
Lift the handset.
Press to redial the last dialed number.
"Wait for dial tone" on page
Dialog 4106 Basic/Dialog 4147 Medium
13.