Last Number Redial; Individual External Line - Ericsson Dialog 4186 High User Manual

Outgoing Calls
u
*0*
z #
µ
u
18

Individual External Line

To make a call on a specific external line:
Lift the handset.
Dial.
Dial the individual external line number and press.
z
Dial the digit or digits to get an external line and the external
number.

Last Number Redial

When you initiate a call (internal or external) the phone automatically
stores all the dialed digits, irrespective of whether the call was
successful or not.
Your phone stores the last 20 dialed numbers. The call position
and the Call Timer record for each number is also stored. Stored
numbers can consist of maximum 24 digits. If you have dialed the
same number more than one time, this number will only be saved
once.
The last dialed number is always the first one that appears in the
display when you press the Redial key, for example:
POS 1
means that the number is stored at the first position.
POS 1
Note: To redial a number that incorporates a wait for a new
dial tone, you must indicate to the telephone where in the
number it must pause and wait for the new dial tone. To do
this, press the Pause key at the proper place in the number.
See section
Press.
The display shows the last dialed number. If you are looking for
another number, use the Scroll keys to find the required number.
Lift the handset to redial the number.
00:02:15
0-00460812345678
"Wait for dial tone" on page 17.
Dialog 4186 High