Table of Contents
Advertisement
4. Press the tractor's lock tabs, tilt the tractor up, and lift it out
of the printer.
5. Replace the front paper guide by sliding it along the printer's
mounting slots until it locks in place. Then close the front
paper guide.
Reinstalling the tractor in the front push position
If a tractor is installed in the pull position, you need to remove it
and install the paper tension unit as described on page 2-32 before
using the front push tractor.
To reinstall the tractor in the front push position, follow these
steps:
1. Make sure the printer is turned off.
Printing on Continuous Paper
2
2-19
Advertisement
Table of Contents
