Epson Stylus COLOR 3000 User Manual page 36

5. After you have installed all of the ink cartridges, the Pause
light stops flashing. Close the ink compartment door.
The first time you install the ink cartridges, the printer
automatically charges the ink delivery system. This
operation takes about 8 minutes to complete.
c
6. When the Pause light stops flashing and stays on
continuously, the ink charging process is finished. Press the
Pause button to turn the Pause light off.
Now you are ready to connect the printer to your computer.
To connect the printer to your PC, see the following section. To
connect it to your Macintosh, see page 2-22.
Note:
To replace an empty ink cartridge with a new one, see page 7-2.
2-10
Getting Started
Caution:
During the ink charging process, the Pause light
continues to flash. Never turn off the printer while the
Pause light is flashing. Also, never remove an ink
cartridge while ink is being charged in the system.