Common Interface
Module Menu
The Common Interface menu allows you to access a pay-per-view (PPV) service on your TV set. This feature operates
once you have obtained a CI module and a viewing card. If you want to use the pay-per view (PPV) service in your region,
please contact your nearest PPV provider for detail.
Important
Switch off the TV using the front panel switch before inserting or removing a module. If you are installing a TV software
update, please follow the dedicated instructions supplied with the module.
Some Common Interface Modules may be a two piece design consisting of a card reader together with the viewing card.
1. When using the design card, first insert
the card reader firmly into the CI slot on the TV.
2. Insert the viewing card into the reader.
3. Switching on the TV.
4. Press the "MENU" buttons and Move
to the "DVB SETUP" Menu with the
UP/DOWN[ / ] buttons.
5. Access the "System" Menu with
the LEFT/RIGHT[ / ] buttons and
Move and Access to the "Common Interface"
Menu with the UP/DOWN[ / ] buttons.
Remark: If no module is inserted the message "Slot 1 : No CI
Module" will be displayed.
6. If you have inserted a CI Module,
Check that it is fully inserted and the CI module name will be displayed.
1. Press the MENU button to call up the menu.
2. Move the selection bar to the DVB Setup menu
with the UP/DOWN [ / ] buttons.
3. Press the RIGHT[ ] button.
4. Place the selection bar on Common Interface Menu
And press the RIGHT[ ] button.
5. You can see All available CI Information.
Setting CI Card
DVB Set-Up
Banner Display Time
Subtitle Language
Audio Language
Common Interface
Signal Strength
System update
Move
Select
CI Main Menu
Common Interface
Move
Select
26
3 seconds
English
English
Select
Select
Select
Back
Store
Exit
Top Up TV
Back
Exit