Connecting External Equipment; Rear Connections; Side Connections; Tv/Av Selection - Daewoo DUA-3270GB Instruction Manual

Connecting
External Equipment
The rear Scart1 (C1), Scart2 (C2) sockets, the side AV socket (B11) (B12), and the S-VHS socket (B10) are three dedicated
sockets to connect audio-video equipment.
REAR SCART 1 SOCKET (AV1)
This socket (C1) has video / audio inputs and outputs. When the TV set is in analogue mode, output is RF analogue signal.
It is recommended to connect to this socket automatic AV switching equipment such as pay-TV decoders, video games,
DVD players and most VCR's. In most cases, when con-
necting powered equipment to this socket, the TV set
switches automatically to AV mode. If not, then use the
TV/AV buttons (A5) or (B9) to select AV1. You can also
receive an S-VHS signal with REAR SCART 1 socket, by
selecting SVHS1 with the TV/AV buttons (A5 or B9).
REAR SCART 2 SOCKET (AV2)
This socket (C2) has video / audio inputs and outputs.
The signal output is a monitor of the picture displayed on
screen.
DIGITAL AUDIO/AUDIO (L+R) JACK
This model has functions that can output digital audio/
audio signals. Digital audio out jack outputs digital audio
signal and Audio L, R jack output audio signal.
S-VIDEO JACK
The side S-VIDEO jack (B10) has video inputs only. It is necessary to con-
nect the audio inputs to socket (B12) in order to have audio and video. To
switch from TV to these inputs, use the TV / AV buttons (A5) or (B9) and
select SVHS3.
SIDE AV SOCKET (AV3)
The side AV socket (B11) - (B12) has audio and video inputs. To switch
from TV to these inputs, use the TV / AV buttons (A5) or (B9) and select
AV3.
Remark: The side S-VIDEO jack (B10) and the VIDEO socket (B11)
must not be connected at the same time.
Monitor out (AV2) signal has the signal connected to S-VIDEO/VIDEO jack.
Allows to switch between TV and external modes.
By repeatedly pressing the remote control TV / AV (A5) or the TV front panel TV / AV (B9) button, the on-screen display
is changed as shown:
TV AV1 SVHS1 AV2
DVB AV1 SVHS1 AV2

Rear connections

VCR / DVD / Video Game / Pay-TV decoder
Important: If your video equipment does not have SCART
socket(s), or if you wish to use only the aerial (RF) connection
(not recommended), then you should make use of PR 00 on the
TV set for best performance.

Side connections

TV/AV selection

AV3 SVHS3 TV (Analog channels)
AV3 SVHS3 DVB (Digital channels)
Video Game
Camcorder
10