Related Manuals for Daewoo DUB-2850GB, DUB-2842GB
Summary of Contents for Daewoo DUB-2850GB, DUB-2842GB
- Page 1 DIGITAL TELEVISION INSTRUCTION MANUAL DUB-2850GB DUB-2842GB Help line Number: 0870 100 2525...
- Page 2 ADDITIONAL INFORMATION FOR TV’S SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced.In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement cover has been obtained.Replacement fuse covers can be...
- Page 3 CAUTION RISK OF ELECTRIC SHOCK CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
-
Page 4: Supplied Accessories
SUPPLIED ACCESSORIES Make sure that the following accessories are provided with the product. Remote Controller Instruction manual Batteries (Option) (2x1.5V, AAA) -
Page 5: Table Of Contents
CONTENTS SUPPLIED ACCESSORIES ........2 REMOTE CONTROL &... -
Page 6: Remote Control & Tv Connections
REMOTE CONTROL & TV CONNECTIONS Local Control Front ON/OFF Side B1 MAIN POWER button B2 STAND-BY indicator B3 REMOTE sensor B4 PROGRAM UP button B5 PROGRAM DOWN button B6 VOLUME UP button B7 VOLUME DOWN button Remote Control Unit TV mode POWER SOUND MUTE NORMAL... -
Page 7: Important Safeguards
IMPORTANT SAFEGUARDS WATER AND MOISTURE The apparatus shall not be exposed to dripping or splashing water and no object filled with liquids, such as vases , should be placed on the apparatus. HEAT Never place the set near heat sources. Never put a naked flame, such as a candle, on the top of TV set. -
Page 8: Connecting External Equipment
CONNECTING EXTERNAL EQUIPMENT The rear Scart1 (C1), Scart2 (C2) sockets, the front AV socket (B10) (B11 and B12), and the S-VHS socket (B9) are three dedicated sockets to connect audio-video equipment. Rear REAR SCART 1 SOCKET (AV1) This socket (C1) has video / audio inputs and outputs. When the TV set is in analogue mode, output is RF analogue signal. -
Page 9: Daily Use
DAILY USE SWITCHING ON TV SET 1) If stand-by indicator (B2) is red, then the TV set is in stand-by mode. You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A6), or PROGRAM UP (A10) / DOWN (A10) buttons. The front panel PROGRAM UP/DOWN buttons (B4 or B5) can also be used. -
Page 10: Program Selection
PROGRAM SELECTION Direct selection Use the remote control NUMBER 0….9 buttons (A6). For two digits or three digits program numbers, enter the second digit within 2 seconds. SOUND CONTROL Volume adjustment Use the remote control VOLUME UP (A13) / DOWN (A13) buttons or the TV set side panel VOLUME UP / DOWN buttons (B6 or B7). -
Page 11: Picture Control
PICTURE CONTROL You can select three pictures settings, by using the remote control NORMAL button (A3) : - Normal I (standard hard picture) - Normal II (standard soft picture) - Favourite For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu. If an NTSC signal is received, then the TINT adjustment will also be available. -
Page 12: Menus Description
MENUS DESCRIPTION MAIN MENU All menus are removed within 60 seconds if you don’t press any button. Press the remote control MENU button (A9) to display the main menu. Then, you have the choice between several sub-menus: If you want to Exit the main menu, press the MENU button (A9) a second time. -
Page 13: Install Menu
INSTALL MENU Automatic tuning system Program list edition TV system modification Channel number Channel Frequency Channel name Program number Program storage number Automatic Tuning System If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C3), you must power on the demodulator and tune Sky News before starting ATSS. - Page 14 Channel skipping - You can select skip „YES” or „NO” using the remote control RED „Skip” button (A20). A program with skip „YES” doesn’t appear on screen when changing channels with the PROGRAM UP (A10) / DOWN (A10) buttons. Manual Channel Tuning Choose a starting point - Select with „Program”...
-
Page 15: Features Menu
FEATURES MENU See section near the end of section DAILY USE for a more detailed explanation of these functions. 1. When switched to ON: Prevents the use of the TV set without remote control 2. Wake up function This function is only selectable when the clock is set. -
Page 16: Teletext
TELETEXT ENTERING/LEAVING TELETEXT MODE - Select the desired program with teletext. In the analog mode: TELETEXT In the digital mode: MHEG - Press the remote control TELETEXT ( ) button (A21) to select teletext mode. The initial page (or the last page viewed if you have already used teletext in the present channel) appears. -
Page 17: Useful Teletext Functions
USEFUL TELETEXT FUNCTIONS INDEX ( ) button (A27): Allows you to return directly to the initial teletext page. SUBPAGE ( ) button (A25): - Press the SUBPAGE button (A25). In the extreme top left corner, instead of the page number, ‘’S..’ ’ will be displayed. This is ready to accept the subpage number. -
Page 18: Teletext Format Picture & Sound Control
TELETEXT FORMAT PICTURE & SOUND CONTROL Doubling character height Repeatedly pressing the HEIGHT ( ) button (A23) doubles the character height in the following order: Upper half of the page (UP) > Lower half of the page (DOWN) > Return to normal height. If the page is in UP or DOWN mode, then normal size is automatically set if : - A new page request is made (e.g. -
Page 19: Dvb Menu
DVB MENU DVB MENU Press the Menu button to display the main menu. then, select DVB MENU. You may see the DVB MENU OSD. Whenever you need more information during any DVB MENU directory, press info button (A5) then you will see more detailed information on the screen. -
Page 20: Channel List
CHANNEL LIST Channel List 1. BBC ONE 2. BBC TWO 3. ITV 1 4. Channel 4 5. five 6..SELECT ◄ ► Function - Select and Delete function is to choose or delete the channel. - Select Edit Name function to change the channel name as you want. Press UP / DOWN key to change characters. -
Page 21: Favourites
FAVOURITES Edit Favourite Lists 1. BBC ONE 2. BBC TWO 3. ITV 1 4. Channel 4 5. five 6..LIST 1 ◄ ► Select List - This menu allows you to make your favourite channel list. You can make 5 favourite lists. - Move highlight on any list (1~5). -
Page 22: Timers
List Schedule EPG - You can check program schedule here. Navigate channel by pressing up/ down/right/left button. - Press Yellow/cyan buttons to change date. Red/green buttons are for changing the time. - Press Info key (A5) to see detailed infor- mation of each program TIMERS Programme Timers... -
Page 23: Setting
SETTINGS Select each sub-menu Configuration This has 4 sub-menus. - Subtitle on/off (also can control this with remote control SUB TITLE button (A18)) - Change Banner time -> off - 1 sec - 2sec - 4sec - 8sec - You can choose your favourite list (see page 19) on Favourite Mode. -
Page 24: Common Interface
COMMON INTERFACE Common Interface Top up TV - This allows you to upgrade your TV set with additional features including access to extra channels (if available) using a conditional access module (eg. TopUp TV). - If there is no CI Card in the slot, „No common interface module detected” appears on the screen. - When you insert CI Card, „Common interface module inserted”... -
Page 25: General Troubleshooting
GENERAL TROUBLESHOOTING PICTURE Snowy Picture Multiple Images Interference Normal Picture No Picture No Colour Poor or Distorted Picture Coloured Patches Normal Picture Can’t record Digital signal with Video or DVD recoder. SYMPTOMS SOUND Noisy Sound Normal Sound Noisy Sound No Sound No Sound Normal Sound Weak or No Sound... -
Page 26: Dvb Troubleshooting
DVB TROUBLESHOOTING Some Problems will only occur when viewing DVB channels. Due to the different techniques involved in digital reception, DVB signal quality can be poor even if you appear to have a strong signal when viewing analogue programmes. The DVB system requires a good quality signal to provide the best picture. When viewing analogue pictures, interference such as signal reflection from nearby buildings or mountains causes ‘ghosting’... -
Page 27: Specifications
AV2/SVHS2: 21 pin Euro jack (audio in/out, video in, YC in, monitor out) RCA jack (side) AV3/SVHS3: (audio in/out, video in, S-video in) RCA jack (rear) SPDIF audio out, audio L/R out CI slot (rear) PCMCIA card Specifications are subject to change without notice. Weight and dimensions shown are approximate. DUB-2850GB, DUB-2842GB...