Chapter 5 Operation Procedures; Initial Installation - NEC Storage Manager User Manual

Chapter 5 Operation Procedures

Chapter 5
5 . 1
5 . 1
5 . 1
When initially installing a system and a disk array, make the settings basically in accordance with the following
procedure.
Operation Procedures
I n i t i a l I n s t a
I n i t i a l I n s t a
I n i t i a l I n s t a
Set the Storage Manger
Set a Disk Array
Bind a Pool or RANK
Bind a Logical Disk
Set a Logical Disk Nickname
Install the Access Control
l l a t i o n
l l a t i o n
l l a t i o n
Execute the following work while referring to the "User's
Manual" or "User's Manual (UNIX)" in accordance with
your OS.
• Install the iSM.
• Set the target disk array as a monitoring target.
• Set the user information.
If necessary, set a Disk Array. (For details, refer to
5.1.2 "Setting a Disk Array".)
Bind a pool or RANK. (For details, refer to 5.1.3
"Binding a Pool or RANK".)
Bind a logical disk. (For details, refer to 5.1.4 "Binding
a Logical Disk".)
Set a nickname of the logical disk. (For details, refer to
5.1.5 "Setting a Logical Disk Nickname".)
If necessary, newly install the Access Control. (For
details, refer to 5.1.6 "Installing the Access Control".)
III-2