Binding Logical Disks - NEC Storage Manager User Manual

Chapter 8 Disk Array Configuration Setting (S100/S1100/S1200/S1300/S2100/S2200/S2300)
8 . 2 . 1 B
8 . 2 . 1 B
8 . 2 . 1 B
In this dialog, LD binding/unbinding can be performed. The operation can be performed by using the popup menu
(right-click) or the buttons on the screen after selecting a logical disk or free space of RANK on the LD Individual
Bind/Unbind screen (Figure 8-14).
Selecting a free space of RANK will enable the [LD Bind] button.
Button Enabled
Click the [LD Bind] button to display the following screen.
(a)
(b)
(c)
Clicking the [OK] button after specifying the required particulars in this screen will start the LD binding.
i n d i n g L o g i c
i n d i n g L o g i c
i n d i n g L o g i c
Figure 8-15 LD Bind
Figure 8-16 LD Bind Dialog
IV-115
a l D i s k s
a l D i s k s
a l D i s k s
Unused Selected
(d)