Pair Setting File - NEC Storage Manager User Manual

F . 2 P a i r S
F . 2 P a i r S
F . 2 P a i r S
A pair setting file enables you to pair logical disks collectively and register AT-groups collectively.
The following shows the format of the pair setting file and a setting sample.
(1) Pair setting file format
(1) A pair setting file is a text file (*.txt, *.csv) in ASCII character format.
(2) Data from a semicolon (;) or sharp (#) to the end of the line is processed as comments.
(3) Uppercase and lowercase characters are distinguished. Be careful in writing characters.
(4) Write "Pair Name List" in the first line except comment lines.
(5) In the lines following "Pair Name List", specify the items for pair setting in the format
below.
"MV DiskArrayName","MV Vol Type","MV Vol Name",["RV DiskArrayName"],"RV
Vol Type","RV Vol Name"[,]
(Items enclosed in brackets [] can be omitted.)
<SYNTAX>
MV DiskArrayName
Specify the name of the disk array to which Master Volume (MV) belongs.
The disk array name can be specified with up to 32 characters.
MV Vol Type
Specify the type of Master Volume.
MV Vol Name
Specify the logical disk name of Master Volume.
The logical disk name can be specified with up to 24 characters.
RV DiskArrayName
Specify the name of the disk array to which Replication Volume (RV) belongs.
The disk array name can be specified with up to 32 characters.
If omitted, the system assumes that RV belongs to the disk array of MV.
RV Vol Type
Specify the type of Replication Volume.
RV Vol Name
Specify the logical disk name of Replication Volume.
The logical disk name can be specified with up to 24 characters.
(6) To create an AT-group, write "[atcreate]".
(7) Specify the [atcreate] items in the following format:
"ATgroupName","DiskArrayName"
<SYNTAX>
ATgroupName
Specify the name of the AT-group to be created.
The At-group name can be specified with up to 32 characters.
e t t i n g F i l e
e t t i n g F i l e
e t t i n g F i l e
39
Appendix F Batch Setup File