Setting File - NEC Storage Manager User Manual

Appendix B Configuration Setting Command
B . 2 . 2
B . 2 . 2
B . 2 . 2
(1) File header
When the following identifier line is written at the beginning of a file, that file can be identified as
the setting file of this command.
# iSMnetconf Configuration File Version x.x.
(2) Sections and items
In the setting file, specify parameters using sections and items.
[Target Disk Array] section
Specify the disk array and service processor number to be set. This section is always required.
array name item:
special file item:
number item:
[Disk Array TCP/IP Information] section
Specify the network-related items for the disk array.
ip address item:
subnet mask item:
gateway address:
[SCSI Socket Information] section
Specify the items related to the restriction of access from the monitoring server.
scsi socket guard invalid item:
scsi valid address item:
S e t t i n g F i l e
S e t t i n g F i l e
S e t t i n g F i l e
10
Specify the disk array name.
Specify the special file name (UNIX version) or disk
number (Windows version).
Specify the service processor number.
Specify the IP address of the disk array.
Specify the subnet mask of the disk array.
Specify the gateway address of the disk array.
Specify whether the restriction of access from the
monitoring server is valid or invalid.
Specify the IP address of the monitoring server for which
access is permitted.