Configuring Common File System Set Parameters For Netware; Section 7.5, "Configuring Common File System Set Parameters For Netware - Novell Open Enterprise Server 2 System Administration Manual

SET Parameters for the Traditional File System
Dirty Disk Cache Delay Time
Minimum File Cache Report Threshold
Automatically Repair Bad Volumes
File Delete Wait Time
Allow Deletion Of Active Directories
Maximum Percent of Volume Space Allowed for Extended Attributes
Maximum Extended Attributes per File or Path
Purge Files On Dismount
Fast Volume Mounts
Maximum Percent Of Volume Used By Directory
Maximum Subdirectory Tree Depth
Volume Low Warn All Users
Volume Low Warning Reset Threshold
Volume Low Warning Threshold
Turbo FAT Re-Use Wait Time
Allow Unowned Files To Be Extended
Auto Mount Mirrored Volume Containing Inactive Device
7.5 Configuring Common File System SET
Parameters for NetWare
The SET parameters for Common File System are shared by NSS and Traditional file systems.
7-2 indicates the default settings in NetWare 6.5 or later for the Common File System SET
parameters.
IMPORTANT: When modifying Common File System SET parameters, ensure that your planned
settings satisfy the requirements for both your NSS and Traditional volumes.
Common File System SET Parameters
Table 7-2
Common File System SET Parameters
Maximum Transactions
Maximum Concurrent Directory Cache Writes
Minimum File Delete Wait Time
Immediate Purge Of Deleted Files
Compression Daily Check Stop Hour
Optimizing Disk and Cache Performance for Traditional Volumes
Default Value
3.3 seconds
20
On
5 minutes 29.6 seconds
On
10
16
Off
On
13
25
On
256
256
5 minutes 29.6 seconds
On
Off
Table
Default Value
10000
75
1 minute 5.9 seconds
Off
6
49