Managing Traditional Software Raid0 Devices - Novell Open Enterprise Server 2 System Administration Manual

6.2 Managing Traditional Software RAID0
Devices
You must use Novell Storage Services Management Utility or the NSS Storage Management plug-
TM
in for iManager to create a software RAID0 device. For instructions, see "Managing Software RAID
Devices" in the OES 2: NSS File System Administration Guide.
After you create the RAID0, use Novell Remote Manager for NetWare to create a Traditional
volume on the device. Make sure to use the RAID0 for your segment. For information on creating a
Traditional volume, see Section 3.7, "Creating and Mounting a Traditional Volume," on page 20.
To create a RAID 10 Traditional volume, mirror the volume you just created. For information on
mirroring Traditional volumes, see Chapter 5, "Using Software RAID1 Devices for Data Fault
Tolerance," on page 35.
42 OES 2: NetWare Traditional File System Administration Guide