Mounting A Traditional Volume; Dismounting A Traditional Volume; Expanding The Size Of A Traditional Volume; Section 3.8, "Mounting A Traditional Volume - Novell Open Enterprise Server 2 System Administration Manual

IMPORTANT: Some attributes cannot be changed after the volume is created. You must
decide before you go forward what attributes you want to assign.
Select any of the following options:
Compression: Enables the file system to compress the files in the volume. You set up file
compression when you create volumes. After you enable file compression, you cannot
turn it off for the life of the volume. You can back up the data in uncompressed form,
create a new uncompressed volume, then restore the uncompressed data to the new
volume.
Migration: Enables the operating system to move infrequently accessed data to remote
areas on your server. This creates space for new and more commonly accessed data.
Selecting this option only enables the attribute. The data migration feature uses a third-
party software package that does the migration function.
Suballocation: Enables the file system to divide partially used disk blocks into
suballocation blocks of 512 bytes. These blocks can be used by other data files.
Mount Volume on Creation: Instructs the operating system to mount the volume when
you create it. Otherwise, you can mount it later.
5 Click Create, then click OK to confirm.
6 After creating a volume, you must mount it in order to use it. Locate the newly created volume
in the list, then click Mount Volume.

3.8 Mounting a Traditional Volume

1 In Novell Remote Manager for NetWare, Click Manage Server > Volumes.
2 Locate the volume you want to mount, then click the Mount link next to it.
When the page refreshes, the option changes from Mount to Dismount.

3.9 Dismounting a Traditional Volume

To repair a Traditional volume, you must dismount that volume.
1 In Novell Remote Manager for NetWare, Click Manage Server > Volumes.
2 Locate the volume you want to dismount, then click the Dismount link next to it.
When the page refreshes, the option changes from Dismount to Mount.

3.10 Expanding the Size of a Traditional Volume

To increase the size of a Traditional volume, add another segment to that volume.
1 In Novell Remote Manager for NetWare, Click Manage Server > Partition Disks.
2 Locate the volume you want to expand, then click the Expand link next to it.
3 Under Free Disk Space, select the device with the amount of space available that you want to
use.
4 Specify the amount of space (in megabytes) that you want to use
5 Click Expand.
NetWare creates a volume segment of that size, then adds it to the volume.
Configuring and Managing NetWare Traditional Volumes 21