Individual Irradiation - Panasonic UJ30 Series User Manual

Operation modes

2) Individual irradiation

When START 1~4 input on the backside of the controller is turned on, individual CH is irradiated.
・ Preparation of individual irradiation: READY 1~4 applicable to each CH is ON
・ Individual start: Turn on START 1~4 input signals on the backside of the controller.
・ Batch stop: Press EMISSION button during irradiation or turn on STOP input on the backside.
① Individual timer irradiation
② Continuous (Con) individual irradiation
22
*2)