Table of Contents
Advertisement
6.3
Default settings mode
This mode is used for the units (°C/°F) for head temperature readings, for switching between
READY/BUSY signal, and for setting the buzzer ON/OFF.
* The default values are Celsius (°C) for temperature display, BUSY, and buzzer ON.
[Default settings mode]
1. While pressing down the MODE switch power ON the controller.
2. When the display starts up
[Switching between °C/°F display]
1. Use △/▽ to switch between °C (Celsius)/°F (Fahrenheit).
2. Press the SET switch.
[Switching between READY/BUSY signal]
1. Use △/▽ to switch between A=READY/b=BUSY.
2. Press the SET switch.
[Switching the buzzer ON/OFF]
1. Use △/▽ to switch between buzzer ON/OFF.
2. Press the SET switch.
[Exiting from default settings mode]
1. Hold down the SET switch to switch to operation mode.
[Restoring default settings
(all settings are restored to their initial default values)]
1. While in default settings mode, press the MODE switch.
EE | | |
2.
will be displayed.
3. Hold down △/▽.
4.
will be displayed.
5. Hold down SET.
EE CLr
appears all settings have been restored to their original
default values, and the controller returns to operation mode.
Operation modes
1
C/F
is displayed.
will be displayed.
2
A/b
will be displayed.
3
On/oFF
1
C/F
will be displayed.
will be displayed. When
19
Hide quick links:
Advertisement
Table of Contents
