Direct Connection (With Crossover Cable) - Panasonic DP-8016P Operating Instructions Manual

Network Scanner

Direct Connection (with Crossover Cable)

■ Direct Connection (with Crossover Cable)
1
Turn OFF ∗ the Power
Switch (Machine and the
PC).
5
Turn OFF ∗ and ON the
Power Switch (Machine
and the PC).
NOTE:
∗
If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13.
76
Connect a Crossover LAN Cable between your machine
2
and the PC.
LAN Cable
(Crossover)
To Machine
(Right Side of Machine)
NOTE: Do not use Standard
LAN Cable.
6
Input your PC's IP
Address into the Address
Book in the machine (see
page 72) or into the
Panasonic Document
Management System
software (refer to the
enclosed CD).
To PC
LAN Cable (Crossover)
(Rear Side of PC)
7
Scan the document(s) to
your PC. (See page 70)