Quick Set Recording (Qsr) - Sanyo HV-DX1E Instruction Manual

Operation with tape
The DVD+VCR allows you to make recordings using a
variety of simple methods:
Quick Set Recording (QSR): Start recording immedi-
ately for a set period of time or until the video cassette
runs out.
VIDEO Plus+ System Recording greatly simplifies
entering the date, channel, start and end times of a
Timer Recording.
Timer Recording: You may record at a later time (up to
1 month from the present). Up to 7 of these
automatic recordings may be set.
The DVD+VCR incorporates Long Play (LP) which
enables you to record up to twice the amount of time on
a video cassette. For example an E-180 will record up
to 180 minutes using Standard Play (SP); using LP you
will be able to record up to 360 minutes. Please note
there will be a slight loss in picture and sound quality
when using LP.

Quick Set Recording (QSR)

Make sure that you have correctly connected
1 1
your DVD+VCR as described earlier in this
book.
Press to turn on your DVD+VCR.
Insert a video cassette with protection tab into
2 2
your DVD+VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press CH/TRK (v v /V V ) to select the programme
3 3
number you wish to record.
You may also directly select programme numbers
using the numerical buttons on the remote con-
trol.
If you wish to record directly from either of the
4 4
SCART sockets or AV INPUT sockets, repeated-
ly press AV until the socket you wish to record
from is displayed.
AV 1 for recording from EURO AV1 socket on the
rear of your DVD+VCR.
AV 2 for recording from EURO AV2 socket on the
rear of your DVD+VCR.
AV 3 for recording from AV INPUT sockets on the
front of your DVD+VCR.
22
Press SP/LP if you wish to record in Long Play
5 5
or Standard Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording
time as SP.
Press REC (z z ) to start recording.
6 6
RECORD will appear on the TV screen.
Press REC several times. Each successive press
will increase the record time by 30 minutes until you
reach a maximum of 9 hours.
Press PAUSE/STEP (X X ) to avoid recording
7 7
unwanted scenes.
Press PAUSE/STEP (X X ) to continue recording.
Tapes can be paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your DVD+VCR will stop recording to pre-
vent damaging the tape or your DVD+VCR.
Press STOP (x x ) to end recording.
8 8
Press EJECT (Z Z ).
EJECT will appear on the TV screen for a few
seconds.
Notes
If you do not wish to record on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.
Remember you can record one programme while
watching another by starting your instant recording,
pressing TV/VCR to select TV mode and then select-
ing a different channel on your TV.
If you press PAUSE/STEP (X X ) during QSR, the
DVD+VCR will enter the record pause mode and QSR
is cancelled.