Toshiba e-STUDIO4540c Series Operator's Manual page 43

2.GA-1211-EX/GA-1310-EX SPECIFIC FUNCTIONS
3
Specify the following items as required and press [OK].
ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable
the HTTP network server service. This option must be enabled for using the following functions:
TopAccess
The e-Filing web utility
GA-1211-EX/GA-1310-EX specific print functions
GA-1211-EX/GA-1310-EX specific scan functions
[PRIMARY PORT NUMBER] — The default primary port number "80" is always used. This port number cannot be
changed.
ENABLE SSL — Press [ENABLE] to enable SSL for accessing TopAccess and the e-Filing web utility, or
[DISABLE] to disable SSL for accessing TopAccess and the e-Filing web utility. When this option is enabled, the
data transferred between the equipment and client computers will be encrypted using a private key when operating
TopAccess and the e-Filing web utility.
To use the GA-1211-EX/GA-1310-EX specific scan functions (the Fiery Remote Scan utility and [SMB/FTP/
OTHER]), SSL must be disabled.
4
Continue to another network setting if required, then press [APPLY NOW].
"NETWORK INITIALIZING" is displayed at the lower left of the screen and this equipment starts initializing the
network interface card to apply the changes. This message disappears after it is finished.
2 GA-1211-EX/GA-1310-EX SPECIFIC FUNCTIONS
Operations From the Control Panel 41