Toshiba V200 Series User Manual page 109

Thus, you can assign the expansion models as needed:
In the above shown screen, you can observe that the address range for the expansion models assign for Slot 1
through Slot 4, it has taken first two digit as 01, 02, 03 & 04 serially.
And last three digits will indicate the register numbers.
The external input signals are allocated to the external input devices/registers (X/XW). The
external output signals are allocated to the external output devices/registers (Y/YW).
The register numbers of the external input and output registers are consecutive. Thus one register number can be
assigned for either input or output.
X01000
GDD288N
Y01000
Similarly.....
X02000
GAA244
Y02000
X01007 X 0 1 0 0 0
Y 0 1 0 0 0
Y01007
X01003 X 0 2 0 0 0
Y 0 2 0 0 0
Y01003
X: Input
Slot Number (Slot 1)
Input: 8 Nos. (000 to 0007)
Y: Output
Slot Number (Slot 1)
Output: 8 Nos. (000 to 007)
X: Input
Slot Number (Slot 2)
Input: 4 Nos. (000 to 0003)
Y: Output
Slot Number (Slot 2)
Output: 4 Nos. (000 to 003)
Page 101