Connecting The Drive And Getting Started; Connecting The Drive - Western Digital My Passport User Manual

Connecting the Drive and Getting Started

2
1
This chapter provides instructions for connecting the drive and installing the WD Drive
Utilities, WD Security, and WD SmartWare software on your computer. It includes the
following topics:

Connecting the Drive

Getting Started with the WD Software
Connecting the Drive
1.
Turn on your computer.
2. Connect the drive to your computer as shown in Figure 3.
3. Verify that the drive appears under My Computer in Windows Explorer.
4. If a Found New Hardware screen appears, click Cancel to close it. The WD software
installs the proper driver for your drive.
Your My Passport drive is now ready to use as an external storage device. You can
enhance its capabilities by installing the WD software that is on the drive:
• WD Security
• WD Drive Utilities
• WD SmartWare
See "Getting Started with the WD Software" on page 6.
Figure 3. Connecting the My Passport Drive
CONNECTING THE DRIVE AND GETTING STARTED – 5
MY PASSPORT
USER MANUAL