Automatic Light Control; High Beam; Headlight Flash - Vauxhall Insignia Owner's Manual

118 Lighting

Automatic light control

Automatic light control function
When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
light and low/high beam automatically
depending on the lighting conditions
and information given by the rain
sensor system.
Daytime running light
Daytime running light increases
visibility of the vehicle during daylight.
Automatic low beam activation
During poor lighting conditions low
beam is switched on.
Furthermore low beam is switched on
if the windscreen wipers have been
activated for several wipes.
Tunnel detection
When a tunnel is entered low beam is
switched on without delay.
Adaptive forward lighting 3 120.

High beam

To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.

Headlight flash

To activate the headlight flash, pull
lever.