If the battery is not the cause of the
fault, release the selector lever and
remove the ignition key from the
ignition switch.
Release selector lever
1. Apply parking brake.
2. Release selector lever trim from
centre console at rear, fold
upwards and rotate to the left.
3. Take the special tool from the
inside of the glovebox cover.
Driving and operating
4. Insert it into the opening as far as
it will go and move the selector
lever out of P or N. If P or N is
engaged again, the selector lever
will be locked in position again.
Have the cause of the power
supply interruption remedied by a
workshop.
5. Mount the selector lever trim on
the centre console and refit.
Remove ignition key from
ignition switch
1. Take the special tool from the
inside of the glovebox cover.
147