Automatic Light Control; High Beam; High Beam Assist - Vauxhall Vivaro C Owner's Manual

130 Lighting
Tail lights
Tail lights are illuminated together
with low / high beam and sidelights.

Automatic light control

When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
lights and headlights automatically
depending on the external lighting
conditions and information given by
the wiper system.
Daytime running light 3 132.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched
on if the windscreen wipers have
been activated for several wipes.

High beam

To activate the high beam, pull the
lever beyond the resistance point.

High beam assist

The camera in the windscreen
detects the lights of oncoming or
preceding vehicles. Once activated,
high beam assist remains active and
switches high beam on and off
automatically. The latest setting of the
high beam assist will remain after the
ignition is switched on again.
This feature automatically activates
the high beam at night when vehicle
is faster than 15 mph.
It switches automatically back to low
beam when:
● A sensor detects the lights of
oncoming or preceding vehicles.
● Driving in urban areas.
● The vehicle is slower than
9 mph.
● It is foggy or snowy.
● Front or rear fog lights are
switched on.
If there are no restrictions detected,
the system switches back to high
beam.