Tyre Repair Kit - Vauxhall Corsa Owner's Manual

10. Align and engage hub cap or wheel
cover 3 and wheel bolt caps 3.
Before refitting the wheel cover clean
the wheel around the retaining clips.
Valve symbol 3 on back of wheel cover
must point towards valve on wheel.
Alloy wheels 3: put hub cap on and
engage, inserting pin on rear of hub
cap into relevant hole in wheel.
Alloy wheels with anti-theft lock 3: Put
hub cap on. Insert and tighten anti-
theft lock 3.
170
11. Close the jacking point flap on the
underside of the vehicle 3. Stow the
replaced wheel – see page 163. Put
away the tools and warning triangle –
see pages 162, 165.
12. Have the tightening torque of the wheel
bolts on the new wheel checked on the
vehicle using a torque wrench as soon
as possible and, if necessary, corrected.
Tightening torque – see page 233.
13. Replace the faulty tyre on the wheel
that was removed.
14. Replace the temporary spare wheel 3
with a full specification wheel without
delay.

Tyre repair kit

Combo
3
Minor damage to the tyre tread caused by
foreign bodies, for example, can be
remedied using the tyre repair kit.
Do not remove foreign bodies from the
tyres.
Damaged areas bigger than 4 mm and
damage to the walls of the tyres cannot be
repaired using the tyre repair kit.
Driving with tyre pressure that is too low
can cause invisible damage to the tyres.
This damage cannot be remedied using
the tyre repair kit. Park vehicle and
contact a workshop. We recommend a
Vauxhall Authorised Repairer.
For important information – see page 173.
If you have a flat tyre:
z Switch on hazard warning lights and
apply hand brake. Place automatic
transmission selector lever in position P,
or with manual transmission engage first
gear or reverse.
z Correctly set up the warning triangle.
Warning triangle – see page 162.