Vauxhall Corsa Owner's Manual page 123

If the cause of the interruption to the power
supply is not the discharged battery,
consult a workshop. We recommend
consulting a Vauxhall Authorised Repairer.
If the vehicle has to be removed from
moving traffic, release clutch as follows:
1. Apply hand brake and switch off
ignition.
2. Open bonnet and engage support.
3. Clean Easytronic around the cap (see
figure) so that no dirt can get into the
opening when the cap is removed.
4. Rotate cap to slacken and remove by
lifting upwards – see figure.
5. Turn the adjusting screw clockwise using
a flat-head screwdriver (vehicle tools -
see page 165) until clear resistance can
be felt. The clutch has now been
disengaged.
Do not turn beyond the resistance, since
this can damage the Easytronic.
6. Fit cleaned cap again. The cap must be
in full contact with the housing.
Towing the vehicle and starting the engine
is not permitted when the clutch has been
released in this way, although the vehicle
can be moved a short distance.
Contact a workshop immediately. We
recommend that you consult a Vauxhall
Authorised Repairer.
121