Universal Remote Control TOTAL CONTROL FX-1 Owner's Manual page 8

Once you've entered the code number and the component has
turned off, press the POWER button on your remote to turn the
component back on.
Now it's time to test the VOLUME and CHANNEL buttons
(or PLAY and STOP buttons for VCR and DVD) to make sure
they all work. For example, perhaps your Sony TV turned
off with code number 147, but the volume controls did not
work properly. In this case, try the next code number listed
for that component. Repeat Step 5 using the next code
number until you find a perfect match.
Once you've entered a correct code you must save it. Press the
component button you just programmed (in this case TV) one
more time to save the code number. The component button LED
light will blink three times to confirm that the code was success-
fully stored. Now when you press the TV component button,
all of the buttons will work with your TV.
Program the remaining components by repeating steps 3
through 7.
IMPORTANT: If the Code Entry Method did not work with
your components, try the Auto-Search Method next as
outlined on page 7.
6