Macropower - Universal Remote Control TOTAL CONTROL FX-1 Owner's Manual

MacroPower™

MacroPower makes several devices work together by press-
ing one button. Imagine the convenience of turning on your
TV, your DVD player and your Surround Sound receiver by
pressing a single button on your FX1. What could normally
take three remotes and three button pushes, the FX1 can
accomplish with the press of one button. We call that
MacroPower. Any of the Power On or the System Off
buttons can be programmed for MacroPower control.
To set it up, follow these easy steps:
To program MacroPower commands for the Power ON button,
press the Power ON button and the MUTE button together and
hold them down for about 3 seconds until one of the component
button LED lights turns on.
IMPORTANT: If you do not press a button within 20 seconds
the LED light will turn off. The remote will exit the program-
ming mode and you will have to start over
13