Setting Up The Anemoscopes - UNI-T UT361 Operating Manual

Setup up the Anemoscopes
Press and hold button 9 (menu) to select feature setup. Press next button to go next
feature sub-menu.
A. USB setup
Press button 8 from USBO
B. Auto Switch Down
Press button 8 from AP00
and need to reset when power on.
C. Auto Record
"REC" display on the LCD with the auto recording time between 0.5 ~ 255 seconds.
Press button 2 to extend auto recording time at the bottom of the LCD. Press button
8 to reduce auto recording time. Press and hold button to store in after power off.
UT361/UT362 OPERATING MANUAL
USB1. Then set up is as the opening default
AP01 and store in after power off. The default keep it
14