Model UT33B/C/D: OPERATING MANUAL
Measurement Operation (13)
l
When continuity testing has been completed, disconnect the connection between
the testing leads and the circuit under test.
F.
Model UT33C: Temperature Measurement
Warning
To avoid harms to you or damages to the
Meter, please do not attempt to input
voltages higher than 60V in DC or 30V in AC.
The Temperature measurement range is -40
~1000
o
C or -40
o
F ~1832
temperature, connect the Meter as follows:
1. Insert the red temperature probe into the
V mA terminal and the black temperature
probe into the COM temperature.
o
F . To measure
25
(see figure 6)
o
C
( figure 6)