Functional Buttons - UNI-T UT371 Operating Manual

Functional Buttons

Below table indicated for information about the functional button operations.
Button
l Press once to turn the meter on.
l Press and hold for 1 minute to turn it off.
ON/OFF
l When measuring RPM and Counts, press once to enter the Hold mode. Press it again
to exit hold mode.
l When measuring RPM and Counts, press it to toggle between RPM and Counts feature.
l Press and hold for 1 minute to enter setup feature, the LCD displays USB. After that,
each press to step through LED / SR / AOFF / CLK / exiting setup feature to enter RPM
R/C
or Count. You could press ON/OFF button to exit setup mode and returning to normal
measurement mode at any time.
l Press this button to choose maximum reading, minimum reading, average reading,
zerong, Tune
M/M/A l Under Tach measurement mode, press M/M/A button to select MAX/MIN/AVE and
normal value measurement,
After entering USB/LED/SR/AOFF/CLK mode, press this button to setup 0 or 1 and time.
l In the RPM or COUNT mode.press and hold the button for more than second the
relative time will be clear and execute HOLD function In the COUNT mode pressing the
button will be clear.
8
Model UT371/372: OPERATING MANUAL
Operation Performed