Model UT371/372: OPERATING MANUAL
Setup
A. USB setup
Press R/C button to select USB feature after turning on the Meter. Then press M/M/A
button to setup 0 or 1. 0 means turn the USB off. 1 means enable the USB feature.
B. LED setup
Press R/C button to select LED feature after turning on the Meter. Then press M/M/A
button to setup 0 or 1. 0 means turn the LED laser off. 1 means enable the LED
laser feature.
C. SR sampling rate setup
Press R/C button to select SR feature after turning on the Meter. Then press M/M/A
button to setup 005 ~ 255. Press and hold M/M/A button to access quick setting.
D. AOFF setup
Press R/C button to select AOFF feature after turning on the Meter. Then press
M/M/A button to setup 0 or 1. 0 is disable auto power off feature. 1 means enable
auto power off feature,
After enable auto power off feature, the Meter will be auto power off after ten minutes
9