Model UT371/372: OPERATING MANUAL
B. Counts
Self-lighted Counts (see figure 4)
1. Position the Meter on a flat place. Hold the
Meter 50~200mm and at the vertical angel not
greater than 30° from the Tachometer light source
to the object under test.
2. Press the ON/OFF button
3. Press the R/C button to select Count mode.
4. Point he Tachometer light source to the object
under count
5. The LED scans the object under count, the
Meter accumulates the counts and displays the
quantity.
Note:
1.The object under count must be reflective,
otherwise Counts feature cannot be used
Figure 4
15